Monday, June 30, 2014

10 What to Do When Not In Laptop Charger

Laptop charger is a pretty easy job. You just plug the charger into a wall outlet and connect to the charger port on the computer. But sometimes not so easy. The division between the socket and the battery of your laptop may have a problem.


Some problems are quite easy to fix with a software tweak or a new battery, but a more complex problem, you need to take your computer to a repair center or even replace the entire battery or charging system .
But if there is more knowledge about this incident will help you save time and money. By contrast approach, you can quickly narrow down the source of the problem and find the most economical solution. Let's explore this issue through a combination of all PCMag page.



1. Did you plug the charger yet? 


It sounds silly, but you need to make sure you've actually plugged in to the laptop. Before checking other issues, you need to make sure the charger is connected to the laptop and the charger to the socket. Next, make sure the battery is placed correctly in its compartment, and make sure there is not anything strange lying on the contacts of the battery or laptop. Finally, try to plug the charger into a different outlet to check the socket know you're having problems.

2. Checking battery 

A simple way to check that the battery is remove it from the laptop and connect the laptop to the charger. If the laptop power on ordinary activities is certainly questionable battery.


3. Checking cord, charger 

Unplug the charger from the outlet and stroked along the length of cord charger, bent to check the ground wire is broken or not, put it up your nose to check if the burning plastic smell trouble may lie there. Check that the plugs are loose or broken or not. Check the adapter if it is discolored, deformed or not.

4. Connectivity test 

When you plug the charger into the charging slot of the laptop, make sure the right plug and make sure. If you suddenly feel loose, loose slots may have been corrupted from within the chassis. You check slot discolored or smell burning fire or not.

5. Temperature problem 

Laptop overheating can also cause non-rechargeable batteries. This problem can cause a lot of harm, the system will automatically shut down to prevent battery overheating and causing fire. In addition, when the temperature increases, the sensor battery may not work correctly, it will alert the system when the battery is fully charged or not just charging the battery status notifications. These problems usually appear on older laptops with outdated technology cooling, or when you use the laptop on bed with pillows or blankets covering ventilation slots. Let the system cool down and take the time to ensure that the ventilation slots clean and unobstructed.


6. Replace the battery and charger 

This is the cheapest and easiest components to replace on most laptops. The charger usually cost less than 200 thousand, and the battery is just below 2 million. You can easily find charger by searching by name or brand of laptops, sometimes even can use other rechargeable brands (but should limit) if there is the same voltage and plug type charger while batteries are often their own codename. You should note that the components of third-party replacement often of inferior quality than the original product.


If we eliminate the problems caused by the charger or the cause by the environment in which your laptop is not charging, the problem may lie in itself, software or hardware on your laptop can error. Let's start by checking the settings and software.


7. Checking settings 


With Windows laptop: In Control Panel, open Power Options. Open plan settings and visually check to see all is set up correctly or not. Pay attention to the settings for the battery, screen, and sleep options are set up correctly or not. For example, setting your battery can cause problems if you set the computer itself off when the battery level gets too low, and low battery level set at too high a rate. You can also assign actions such as sleep and shutdown when closing the lid or pressing the power button laptop. The easiest way to ensure that your settings are not causing trouble restore to factory default settings.


With the Mac laptop: In System Preferences, select Enegy Saver frames. Setting up Mac can be changed by a slider that lets you select the amount of time off the computer and wait for the screen. Try to restore all settings to default settings to see the cause of the problem or not.


8. Updated drivers 

With MacBook Air to reset the System Management Controller you need to press and hold the power button and key combination Shift-Control-Option.


With Windows laptop: In Control Panel, open Device Manager. Under the "Batteries" you will see three items, a battery, a charger and an item to be listed as "Microsoft ACPI Compliant Control Method Battery". Open each item, you will see the Properties window. Under the tab "Driver", you will see a button labeled "Update Driver". Please click the button to update the drivers for all three categories. Once the drivers have been updated, restart the laptop and charger jack. If you can not resolve the problem, uninstall completely install the "Microsoft ACPI Compliant Control Method Battery" and reboot.


With laptop Mac: On Mac laptop you need to reset the System Management Controller (SMC). With Mac computers removable battery you can do this simply follow these steps: Turn the power off, remove the battery, disconnect the connection between the charger and the computer, press and hold the power button for 5 second. Reinstall the battery, connect the charger, and turn the computer on.


For new Mac computer battery attached to the frame, turn off your computer, but disconnect the charger from the computer. When the computer is turned off, press and hold the power button while holding down the Shift + Control + Option keys on the left side of the keyboard. Release the keys and the power button at the same time, then try the power adapter into the laptop look tackles the problem or not.


9. Calling support 


If you do not fix the problem, you should call technical support. Your particular circumstances and form of your notebook may be experiencing personal problems, and a support staff of experienced technicians will be able to help you figure out the problem. In any case, if possible you should contact the site directly selling laptop or warranty centers to ensure their rights.


10. The internal problems 

When you have tried all the alternative solutions from the charger, battery to check settings and software updates, but the problem is still not resolved, then perhaps the problem lies inside the laptop. Some internal components can be problematic or defective. Common culprit is the motherboard error, error logic board, battery and sensor failure. You should take your laptop to a service center or a genuine computer repair shops in the area to repair, remedy.

Khuyenmaicoupon.biz

No comments:

Post a Comment